Harman Kardon AVR 230 AV Receiver
Harman Kardon AVR230 £493.50 inc VAT
Californian AudioVisual giant Harman Kardon has always had a somewhat limited following here in the UK. Why this is the case we do not know. With technologies like VMAX and Harman's excellent Logic 7 processing (as designed for their high-end Lexicon brand), build quality and style like this, and simple to understand setup and control, one would think these boxes would lead the march on Home Cinema products.
With a musical side to their amps, much like Arcams do, Harman products make for an ideal basis for a living room based home cinema system where many AV products are geared toward the dedicated Home Cinema room installation. All the family can use the simple layout of the learning remote, the amp performs very well for stereo (or multi-channel) music playback, and with higher models will have no issue throwing some background music into the kitchen and dining room too! Even if the main room wants to enjoy some TV watchin'!
High performance at a highly attractive price. The Harman Kardon AVR230 features a seven-channel, high-current amplifier with power enough for the most demanding digital soundtracks, all of the popular surround sound modes, component video switching, an EzSet remote and a complete multiroom system with a standard Zone II remote. Plus front-panel inputs for analog and digital sources, as well as composite and S-Video jacks, for quick connections to digital cameras, camcorders or video games.
picture AVR230 front | picture AVR230 rear
Harman Kardon AVR 230 Audio |
||
Stereo Mode Continuous Average Power (FTC) per Channel : |
65 Watts per channel, 20Hz – 20kHz, @ <0.07% THD, both channels driven into 8 ohms |
|
Six-Channel Surround Modes, Power per Individual Channel : |
||
|
Front L & R Channels : |
50 Watts per channel @ <0.07% THD, 20Hz – 20kHz into 8 ohms |
|
|
Center Channel : |
50 Watts @ <0.07% THD, 20Hz – 20kHz into 8 ohms |
|
|
Surround Channels (L & R Side, Back) : |
50 Watts per channel @ <0.07% THD, 20Hz – 20kHz into 8 ohms |
|
Input Sensitivity/Impedance Linear (High-Level) : |
200mV/47k ohms |
|
Signal-to-Noise Ratio (IHF-A) : |
100dB |
|
Surround System Adjacent Channel Separation : |
||
|
Dolby® Pro Logic® I and II : |
40dB |
|
|
Dolby® Digital : |
55dB |
|
|
DTS® : |
55dB |
|
Frequency Response at 1W (+0dB,–3dB) : |
10Hz – 130kHz |
|
High Instantaneous Current Capability (HCC) : |
±35 Amps |
|
Transient Intermodulation Distortion (TIM) : |
Unmeasurable |
|
Slew Rate : |
40V/µsec |
|
Harman Kardon AVR-230 FM Tuner |
||
Frequency Range : |
87.5–108.0MHz |
|
Usable Sensitivity : |
IHF 1.3µV/13.2dBf |
|
Signal-to-Noise Ratio : |
Mono/Stereo 70/68dB |
|
Distortion : |
Mono/Stereo 0.2/0.3% |
|
Stereo Separation : |
40dB @ 1kHz |
|
Selectivity : |
±400kHz, 70dB |
|
Image Rejection : |
80dB |
|
IF Rejection : |
90dB |
|
Harman Kardon AVR230 AM Tuner |
||
Frequency Range : |
520 – 1720kHz |
|
Signal-to-Noise Ratio : |
45dB |
|
Usable Sensitivity : |
Loop 500µV |
|
Distortion : |
1kHz, 50% Mod 0.8% |
|
Selectivity : |
±10kHz, 30dB |
|
Harman Kardon AVR 230 Video |
||
Television Format : |
NTSC |
|
Input Level/Impedance : |
1Vp-p/75 ohms |
|
Output Level/Impedance : |
1Vp-p/75 ohms |
|
Video Frequency Response : |
||
|
Composite and S-Video : |
10Hz – 8MHz (–3dB) |
|
|
Component Video : |
10Hz – 30MHz (–3dB) |
|
Harman Kardon AVR-230 General |
||
Power Requirement : |
AC 120V/60Hz |
|
Power Consumption : |
118W idle, 890W maximum (6 channels driven) |
|
Unit Dimensions : |
||
|
Width : |
17.3 inches (440mm) |
|
|
Height : |
6.6 inches (168mm) |
|
|
Depth : |
15 inches (382mm) |
|
Carton Dimensions : |
21.5 inches x 9.9 inches x 17.9 inches (545mm x 251mm x 455mm) |
|
Unit Weight : |
27.3 lb (12.4kg) |
|
Shipping Weight (System, Accessories, Packing) : |
31.9 lb (14.5kg) |
|
