Custom Lighting Solutions

Our lighting systems can be integrated within a room, or within the whole house. Further integration with existing Crestron/AMX or similar control systems is also easily available .

Our main lighting controllers and pads come from the Lutron range, the Grafik system being most suitable for a single or split-room installation. The controller allows for four independant dimming circuits, with four "moods" that will be pre-programmed by us, but also easily adjusted by the user.

The moods represent the most common activities, with the four lighting circuits each achiveing a different dim level for each mood. An example might be in a projection room where (apart from off) the lowest level mood might illuminate just skirt level LEDs and some sparkles in the ceiling, the next level might raise the dim and add main wall-lights, another level up might introduce master ceiling lights.

The system has a simple wall-plate control, control from the master controller, and is easily integrated into a control system or programmable remote control. We can even integrate lighting into one-touch commands from the remote (e.g. pressing "Projector" might, in addition to lowering the screen also dim the lights).

The HomeWorks system is a more complex controller for a whole-home layout. It has the same functionality per-room as the Grafik system, but also adds a few extra tricks.

Vacation mode is our favorite. The HomeWorks system learns user habits and is able to randomly replicate this when you are away on holiday so it always appears someone is home. The more complex management system allows us to force the use of only energy efficient lighting circuits, or only certain areas of the home.

The HomeWorks system can also be integrated with security and control systems automatically giving light when a fire alarm is raised for example.

For more information on the Lutron range please visit their website: www.lutron.com